Rain Test Chamber
Rain Test Chamber
- 2.5m Spray distance
- Simulated rain test
- Waterproof test
- Color touch screen
- Observation window
- IPX3、IPX4、IPX5、IPX6
Application of Rain Test Chamber
Use the rain test chamber to simulate rainy climate conditions to test whether the product performance is up to standard, which is usually used in product design, improvement, verification and factory inspection.
Rain test chamber can be used to test electronics, lamps, electric cabinets, electrical components, automobiles, motorcycles, parts, etc.
Features of Rain Test Chamber
- IPX3, IPX4, IPX5, IPX6 waterproof level test
- Spray ring swings up and down, speed and angle can be adjusted precisely
- Driven by a stepping motor, almost the entire surface can be sprayed
- 0-999min test time can be set
- Rotating table is automatically reversed to prevent winding
Model | KM-FS36BS-R400 |
Spray ring diameter | R40cm |
Inner Dimensions W×H×D（mm） | W1000×H1000×D1000 mm |
External Dimensions W×H×D（mm） | W1450×H3500×D1950 mm |
Observation window | 46×56 cm |
Rotating table diameter | Φ60cm |
Rotating table adjustable height | 40-75cm |
Spray ring flow（L/mm） | IPX3=1.1 L/min, IPX4=1.8 L/min |
Spray ring speed | 240°: 4 seconds 720°: 12 seconds (back and forth) |
Spray ring angle | IPX3=±120°, IPX4=±350° |
Flow control method | Manually adjust the flow rate by using a flow meter with an adjustment panel |
Rotating table speed | 1-5r/min(adjustable) |
Water pressure | Adjust according to the specified water flow |
Spray distance | 2.5m |
Control systems | Touch screen + Panasonic PLC |
IPX5 Drip hole diameter | 0.63 |
IPX6 Drip hole diameter | 1.25 |
IPX5 flow（L/min） | 12.5±0.625 |
IPX6 flow（L/min） | 100±5L/min |
