Walk-in environmental chambers are used to test and store a wide range of large components, assemblies, and finished products in specific temperature and/or humidity conditions, to see whether the performance can meet the intended requirements.
Walk-in environmental test chambers are used for testing or storing products that require a large capacity chamber. The application fields include full vehicle testing, automotive components, solar panels, electronic components, packaging, pharmaceutical stability testing, biological research, industrial applications, and more. KOMEG walk-in environmental chamber has a well-designed structure that takes into consideration the safe operating range of various accessories, ensuring long-term stable operation of the equipment while achieving energy efficiency.
KOMEG offers a broad selection of various types of walk-in chambers to meet almost any test requirement. We can design a walk-in chamber solution for you based on the size and number of samples you are testing.
| Model No. | KWH-4 | KWH-8 | KWH-10 | KWH-15 | KWH-45 | KWH-55 |
| Test Space Volume（m³） | 4 | 8 | 10 | 15 | 45 | 55 |
| Inner chamber size W×H×D(mm) | 2000×2000×1000 | 2000×2000×2000 | 2040×2100×2100 | 2500×3000×2000 | 5000×3000×3000 | 5000×2200×5000 |
| Temperature range | High Temp: 80ºC, +120ºC Low Temp: -60 ºC, -50 ºC, -40 ºC , -30 ºC, -20 ºC , -10 ºC, 0 ºC | |||||
| Humidity range | 20% to 98% RH | |||||
| Temp. & humidity fluctuation | ±0.5°C/±2.5% RH | |||||
| Temp. uniformity | ≤ 2.0°C | |||||
| Heating rate | +20ºC~ +80ºC within 60 min | |||||
| Cooling rate | +20ºC~ -55ºC, -40ºC, -20 ºC ,-10 ºC within 120 or 90 or 60 min | |||||
| Exterior chamber material | High-quality carbon steel with painting | |||||
| Interior chamber material | SUS304 matte stainless steel plate | |||||
| Insulation material | Rigid polyurethane foam insulation | |||||
| Cooling mode | Water cooled | |||||
| Controller | LCD Touch Screen Controller with PID control | |||||
| Safety protection device | NFB(No fuse breaker), over pressure, over heat and over current protectors for compressor, over temperature protectors, over load protector of fan, dry heat protector,short of water protector | |||||
| Standard accessory | Sight window*1, Cable port(portΦ100mm), LED Lighting device, Mobile Casters with foot cups | |||||
| Ambient temp. | +5 to +35°C | |||||
| Power supply | 380V AC 3Ø 50Hz | |||||
| Customization service | Non-standard or special requirements can be customized. | |||||
GET A QUOTE
Latest News on KOMEG Products
Explore More Environmental Test Chamber News
In environmental reliability testing, temperature change is one of the most important factors used to evaluate product durability and potential failure risks. However, not all
1. Introduction: Why HAST Testing Matters in Modern Reliability Engineering As semiconductor devices and electronic products continue to become smaller, more powerful, and more highly
Introduction: Why Thermal Reliability Matters for Enterprise SSDs in AI Data Centers The rapid growth of artificial intelligence (AI), machine learning, and high-performance computing (HPC)
1. Introduction to IEC 60068-2-14 The IEC 60068-2-14 standard (Environmental Testing – Test N: Change of Temperature) defines standardized test procedures for evaluating the ability
